Manufacturing Engineer Shift B
Encontrado en: Talent CR S2 - hace 3 semanas
Job Summary
& ResponsibilitiesNevro is seeking a Manufacturing Engineer that will play a key role in ensuring manufacturability and testability of product designs and ensure supply chain, manufacturing processes, tools and equipment are in place and capable of delivering Class III implantable Neuromodulation system for pain management. This position reports to the Sr. Principal Manufacturing Engineer or equivalent. This position will be located in the Coyol FTZ Park in Costa Rica.
Evaluation of production equipment to support process improvements, capacity and cycle time requirements. Lead the acquisition, installation and qualification of production equipment and tooling, including writing the IQ, OQ, PQ documentation. Understand manufacturing and problem-solving concepts like Value Stream mapping, 5S and DMAIC to improve quality, labor efficiency, and throughput. Lead, participate and proposed suitability solutions for production and improve manufacturability. Manage and maintain MP (manufacturing procedure) through the change order process. Drive regular production meetings to monitor manufacturing line performance metrics/line health (First pass yield, Scrap Rate, NC rate). Utilize tools such Gage R&R, Cp, Cpk, and SPC to ensure capable processes and improve process and first pass yield and eliminate scrap. Work with Quality counterpart to address manufacturing nonconformances and customer complaint
Role Requirements
S. Mechanical/Electrical Engineering. Advanced degree (M.S.) is preferred. A minimum of 3 years of experience within the Medical Device industry, preferably manufacturing and/or designing Active Implantable Medical Devices (AIMDs) preferred. Strong English oral and written communication. Knowledge of ISO 13485, Current US Food and Drug Administration -Quality System Regulations.
Skills and Knowledge
Strong project leadership skills, utilizing structured project management tools. Strong interpersonal and technical writing skills. Experience managing component suppliers. Prior experience with manufacturing transfers Strong electro-mechanical design/manufacturing and analysis skills. Experience with Solidworks and Six Sigma Certification a plus. Good analytical and problem-solving skills. Requires the ability to travel approximately 20% of the time throughout the United States and internationally. Good problem solving and decision-making skills Adhere to all EHS rules and requirements and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control Must be organized, detail-oriented and adaptable#LI-JS1
-
Manufacturing Technician 1
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleManufacturing Technician 1 (Shift B)Job DescriptionManufacturing Engineer I SMA (Substrate Mount Assembly) Dicing & ScannersResponsibilitiesExecutes process technology development activitiesCreates and revises Manufacturing DocumentationIdentifies and executes improvements in manufacturing processes, tools and equipment. Implements cost reduction...
-
Manufacturing Technician 1
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleManufacturing Technician 1 (Shift B)Job DescriptionManufacturing Engineer I SMA (Substrate Mount Assembly) Dicing & ScannersResponsibilitiesExecutes process technology development activitiesCreates and revises Manufacturing DocumentationIdentifies and executes improvements in manufacturing processes, tools and equipment. Implements cost reduction...
-
Manufacturing Technician 1
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoManufacturing Engineer I SMA (Substrate Mount Assembly) Dicing & Scanners Responsibilities Executes process technology development activities Creates and revises Manufacturing Documentation Identifies and executes improvements in manufacturing processes, tools and equipment. Implements cost reduction improvements with guidance from manufacturing...
-
Manufacturing Technician 1
Encontrado en: beBee S CR - hace 4 semanas
Alajuela, Costa Rica Philips A tiempo completoManufacturing Engineer I SMA (Substrate Mount Assembly) Dicing & Scanners Responsibilities Executes process technology development activities Creates and revises Manufacturing Documentation Identifies and executes improvements in manufacturing processes, tools and equipment. Implements cost reduction improvements with guidance from manufacturing...
-
Manufacturing Engineer
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleManufacturing EngineerJob DescriptionMaintenance & Manufacturing Engineer 1ResponsibilitiesExecutes process technology development activitiesExecutes equipment Validation StrategyCreates and revises Maintenance documentationInstalls equipment and supports ramp-up of the process at the siteIdentifies and executes improvements in manufacturing...
-
Manufacturing Engineer 1
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleManufacturing Engineer 1Job DescriptionManufacturing Engineer 1Responsibilities Executes process technology development activities Executes Software Validation Strategy Creates and revises Manufacturing documentation Installs equipment and supports ramp-up of the process at the site Identifies and executes improvements in...
-
Manufacturing Engineer 1
Encontrado en: beBee S CR - hace 4 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleManufacturing Engineer 1Job DescriptionManufacturing Engineer 1Responsibilities Executes process technology development activities Executes Software Validation Strategy Creates and revises Manufacturing documentation Installs equipment and supports ramp-up of the process at the site Identifies and executes improvements in...
-
Maintenance & Manufacturing Engineer
Encontrado en: beBee S CR - hace 2 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleMaintenance & Manufacturing EngineerJob DescriptionMaintenance & Manufacturing Engineer 1ResponsibilitiesExecutes process technology development activitiesExecutes equipment Validation StrategyCreates and revises Maintenance documentationInstalls equipment and supports ramp-up of the process at the siteIdentifies and executes improvements in...
-
Maintenance & Manufacturing Engineer
Encontrado en: beBee jobs CR - hace 2 semanas
Alajuela, Alajuela, Costa Rica Philips A tiempo completoJob TitleMaintenance & Manufacturing EngineerJob DescriptionMaintenance & Manufacturing Engineer 1ResponsibilitiesExecutes process technology development activitiesExecutes equipment Validation StrategyCreates and revises Maintenance documentationInstalls equipment and supports ramp-up of the process at the siteIdentifies and executes improvements in...
-
Manufacturing Engineer 3
Encontrado en: beBee S CR - hace 4 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleManufacturing Engineer 3Job DescriptionManufacturing Engineer 3Job OverviewExcellent understanding of product functionality and the manufacturing processes for multiple product lines.Monitors and improves line yields, cycle times, and costs. Resolves production issues. Competent at implementing lean manufacturing processes.Leads process and...
-
Manufacturing Engineer IV
Encontrado en: Talent CR S2 - hace 2 semanas
Alajuela, Costa Rica Abbott A tiempo completoThe Opportunity This position works out of our Costa Rica – Alajuela location in the Electrophysiology Division in Abbott’s Electrophysiology (EP) business, we’re advancing the treatment of heart disease through breakthrough medical technologies in atrial fibrillation, allowing people to restore their health and get on with their lives. As the...
-
Intern Manufacturing Engineer SRC
Encontrado en: beBee jobs CR - hace 2 semanas
Alajuela, Alajuela, Costa Rica Philips A tiempo completoJob TitleIntern Manufacturing Engineer SRCJob DescriptionJob title: Intern Manufacturing Engineer SRCYour role: Support to process flow for new suppliers to develop new material or equipment needs. Supports to the execution of the activities defined in project. Basic knowledge of cost analysis for new product expenditures. May support internal audit...
-
Sr Manufacturing Engineer
Encontrado en: beBee S CR - hace 4 semanas
Alajuela, Costa Rica Abbott Laboratories A tiempo completoAbout Abbott Sr Manufacturing EngineerAbbott is a global healthcare leader, creating breakthrough science to improve peopleâs health. Weâre always looking towards the future, anticipating changes in medical science and technology.Working at Abbott At Abbott, you can do work that matters, grow, and learn, care for yourself and family, be your true...
-
Intern Manufacturing Engineer SRC
Encontrado en: beBee S CR - hace 2 semanas
Alajuela, Costa Rica Philips A tiempo completoJob TitleIntern Manufacturing Engineer SRCJob DescriptionJob title:Â Intern Manufacturing Engineer SRCYour role:Support to process flow for new suppliers to develop new material or equipment needs.Supports to the execution of the activities defined in project. Basic knowledge of cost analysis for new product expenditures.May support internal audit...
-
Manufacturing Engineer
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoMaintenance & Manufacturing Engineer 1 Responsibilities Executes process technology development activities Executes equipment ValidationStrategy Creates and revises Maintenance documentation Installs equipment and supports ramp-up of the process at the site Identifies and executes improvements in manufacturing processes, tools and equipment. Leads and...
-
Manufacturing Engineer
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoMaintenance & Manufacturing Engineer 1 Responsibilities Executes process technology development activities Executes equipment ValidationStrategy Creates and revises Maintenance documentation Installs equipment and supports ramp-up of the process at the site Identifies and executes improvements in manufacturing processes, tools and equipment. Leads and...
-
Manufacturing Engineering Section Leader
Encontrado en: Talent CR S2 - hace 2 semanas
Alajuela, Costa Rica Abbott A tiempo completoThe Opportunity This position works out of our Costa Rica, Zona Franca Coyol – Alajuela location in the EP Division. In Abbott’s Electrophysiology (EP) business, we’re advancing the treatment of heart disease through breakthrough medical technologies in atrial fibrillation, allowing people to restore their health and get on with their lives. As...
-
Product Industrialization Engineer
Encontrado en: beBee S CR - hace 4 días
Alajuela, Costa Rica Philips A tiempo completoJob TitleProduct Industrialization EngineerJob DescriptionProduct Industrialization EngineerLeads the development and release of Manufacturing processes, tools and equipment for NPI projects, both outsourced and in-house. Can also lead Manufacturing process development activities in Advanced Development projects.Responsibilities⢠Part of initial phase...
-
Manufacturing Engineer 1
Encontrado en: beBee S CR - hace 3 semanas
Alajuela, Costa Rica Philips A tiempo completoManufacturing Engineer 1 Responsibilities Executes process technology development activities Executes Software ValidationStrategy Creates and revises Manufacturing documentation Installs equipment and supports ramp-up of the process at the site Identifies and executes improvements in manufacturing processes, tools and equipment. Leads and implements...
-
Manufacturing Engineer 1
Encontrado en: beBee S CR - hace 4 semanas
Alajuela, Costa Rica Philips A tiempo completoManufacturing Engineer 1 Responsibilities Executes process technology development activities Executes Software ValidationStrategy Creates and revises Manufacturing documentation Installs equipment and supports ramp-up of the process at the site Identifies and executes improvements in manufacturing processes, tools and equipment. Leads and implements...